in-tube motor submerged rollers for slatted covers
 |
|
|
INCLUDED
in the price of the submerged roller are: Stainless steel axle One motor complete with thermal trip and fixing support One 220v/24v control panel One three way key switch One set of cover to roller straps |
NOT
included are: |
THIS SYSTEM SHOULD BE PROTECTED WITH AN RCD DEVICE WHICH IS NOT SUPPLIED
|
||
 |
|
If required in 316 stainless steel please add 10% |
|
| diameter of roller and slats when rolled up | |||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||
| Important Notes - Please read | |
| 1. When pricing for submerged reel
systems, always allow one extra metre on the length of the slats for attaching
to reel system. 2. When siting the key switch, always ensure that it is visible from the pool, to avoid the possibility of the cover being closed whilst swimmers are still using the pool. |
3. Ensure that any automatic cleaners or any items that may become entangled are removed from the pool during closing and opening. 4. Make sure that the pool is fitted with an automatic water levelling device and overflow. The water level must be constantly at the correct height to prevent damage to the cover when opening or shutting. |
|
| Quick links
to all pages within Slatted Covers section: |
Ordering, warranty etc Above ground reels - manual and tubular motors | Wall sections and optioal extras Deck mounted reels - manual and tubular motors |
|
Submerged rollers Beams and pit covers (optional extras) |
PVC slats 60mm Slats for step bay areas |
| All prices exclude VAT | Copyright © 2009 |
 |
Please ask for a delivery quotation 