Aquamat 6mm foam heat retention covers for pools

6mm foam
Aquamat 6mm Heat Retention Covers are made from heavy duty closed cell polyethylene foam (460gm²)which makes them particularly suitable for use on school or commercial pools and spas, giving large savings on fuel bills due to the reduction in heat loss from the surface of the pool.
Aquamat 6mm Covers are supplied heat welded on the top and bottom on all seams and can be finished with a tough PVC hem at an additional cost. This cover should not be used above 40^oC (104^oF)

Part No.	COVER TYPE	£ price	PER
12-0000	6mm heat retention	1.56	sq ft
12-0001	6mm heat retention	16.80	sq mtr
12-0020	Hemming	1.20	linear ft
12-0021	Hemming	3.78	linear mtr
12-0025	Shaping charge	15%	area of shape
12-0030	Cut outs / roman end	25.00	EACH
12-0050	Commercial tow kit covers over 40' x 20'	22.40	linear ft

Covers are made approximately 10mm smaller than the pool.

During the manufacture the heat welding process may cause slight reversion. This is acceptable throughout the swimming
pool industry and will not detract from the life expectancy or performance of the cover. Due to the nature of the material, manufacturing creases may occur. Packing folds may also cause creases: to try and avoid this, our policy is to roll covers like a carpet for transport purposes.

Carriage charges on covers over 18’ wide will be a minimum of £150.00.

Quick links to all pages within
Heat Retention section:

6 mm foam
Energy saving charts

S/B reinforced bubble cover

All prices exclude VAT